Active Anti-Corrosion/Contamination Solutions

The Polymelt 12

The Polymelt 12 was designed to offer the following advantages:

  • Ease of transportation
  • Lightweight
  • Compact for use in very confined areas
  • No need for air compressor
  • Multi voltage options
  • Perfect for repairs and field inspections
  • Reservoir, hose and gun are all individually heated, therefore no need to flush machine after use
PM12

Specifications

Hopper Capacity 5.5 KG / 12 lbs
Operating Temperature 40 to 218°C / 104 to 425°F
Melt Rate (per hour) 8kg/hr/17.3lb/hr
Pump Rate .91kg/min/2lb/min
Pump Compression Ratios 12:1
Gear Pump Capacity 10cc
Hose Output Zones 2
Maximum Working Hydraulic Pressure 68 bar (1000psi)
Temperature Control Stability ±1°c/1°F
Electrical Service Standard 220-­240VAC 1 Phase 50/60Hz, 15 amps peak at 240v
Working Viscosity 500 – 50,000 cps

Dimensions

Height (H) 65cm/25.5in
Depth (D) 50cm / 20in
Width (W) 70cm / 27.5in
Weight (Empty) 65kg / 143lbs
Hose Length 20ft standard