Active Anti-Corrosion/Contamination Solutions

Oxitape offers:

  • Oxitape brings the benefits of TM198 to a wider range of applications assets and environments including: splash zone, ground-air pipe interface, pipe support, buried pipe
  • Savings to both operational and capital expenditure
  • Protective shell for TM198, maintaining contact with substrate
  • Resistant to chemicals, UV, abrasion and impact
  • Easy and fast to apply with no process downtime
  • Ready to use out of the packet, no preparation required
  • Tailored solution – different roll lengths and sizes available
  • Easily removed along with TM198 for maintenance and inspection and can be reapplied/wrapped
  • Long term asset protection in harsh environments when combined with TM198 

In Detail

  • Oxitape is a moisture activated composite tape that cures in air or water to form a hard shell
  • It is a protective shell that is both chemical, UV, abrasion and impact resistant
  • Suitable for application over TM198 in areas subject to heavy environmental impact both above and below ground, e.g. wave slam, impact from debris and for equipment to be buried underground.  Especially suitable for the splash zone in the coastal/offshore environment.
  • Oxitape is simply applied over the top of Oxifree TM198 providing a defensive shell that offers complete protection from contact as well as corrosion and contamination
  • Folowing the application of TM198, Oxitape can be applied immediately.  Typical application time for a flange on a 2 inch pipe is 5 minutes
  • Both products can be easily removed making it easy to conduct inspection and maintenance
  • The combination of Oxifree TM198 and Oxitape can be applied very quickly to provide long term protection
  • The combination of both Oxifree TM198 and Oxitape brings the benefits of TM198 to an even wider range of applications, assets and environments
  • Oxitape can withstand impact force of over 300ft/lbs without penetration
  • Oxitape has a high abrasion resistance, abrasion penetration of 0.076mm per second achieved with #80 Aluminium Oxide Blast media applied at 80 Psi, applied from blast nozzle 25mm from test sample.

How it works – watch our videos